1 / 4
Tampon Dispenser for two sizes
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A dispenser for two sizes of Tampons
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 55
- Makes
- 0
- Views
- 349
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
My wife asked for on, so I made one.
The left side fits 13mm x 51mm (normal), the right side 15mm x 51mm (super). 1mm bigger in any direction might work as well.
For the text I used an open source font that I found online, but I don’t remember the name :/
Double-sided tape did the trick to fix it to the wall.
Printing Instruction:
You should print upright without supports, but use a filament that is known for good bridging.
The Onshape model can be found here: https://cad.onshape.com/documents/63a45b2da7f31aa3f5fd9e4d/w/d7805aab4f7e403be07e9c4e/e/324f6774e52bff2c7c2bfd63