1 / 3
Hitron Coda 5610Q Cable Modem Rackmount Case
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Fits your (bridge-mode) modem in your homelab rack
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 9
- Makes
- 0
- Views
- 135
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
Notes
This case does not support the Wi-Fi antenna this modem comes with. (I also ended up not needing the “left ear” part in my installation.)
Tools for the teardown
- T10H “Security” Torx screwdriver
- #2 Phillips head screwdriver
- Spudger / something to pry
Teardown
- Remove the four T10H screws on the bottom.
- Unclip the front.
- Remove the one screw on the front of the case:
- Undo the clips around the rest of the case:
- Remove the four Phillips screws, disconnect the four Wi-Fi antenna and remove them. (I recommend saving the case and antenna in the box the modem came in.)
Hardware for the case
- 8 M3x4x5 threaded brass inserts
- 4 M3x6 BHCS
- 4 M3x8 FHCS
Additional hardware to use the “left ear” part
- 2 M3x4x5 threaded brass inserts
- 2 M3x8 BHCS or SHCS