Waveshare CM4 IO Board w/ POE case with fan lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A case for the the waveshare CM4 IO board (POE edition) with a lid that can mount a 40mmx40mmx10mm fan directly over CM4
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 34
- Makes
- 0
- Views
- 143
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
This case is designed to mount the CM4 IO board (POE) with access to all IO slots, including the SD card.
The lid can mount a 40mmx40mmx10mm fan directly above the CM4 with clearance for a heatsink to provide optimal cooling for heavier workloads. Mount the fan so it blows ait down over the heatsink.
PLA is probably fine but PETG is advised. some of the tolerances are quite tight, so there is enought thickness to the case whilst still being able to access all thje ports so make sure your printer is properly tuned.
Us m2.5 x 8mm screws (a little longer or shorter probably fine) to secure the lid.
CRITCAL: If disassembling, remember to remove the SD card before taking the board out or you will snap off the SD connector (ask me how I know).