Labos rag hanger
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple rag hanger compatible withe the Labos sytem by Häfele.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 15
- Makes
- 0
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution — Noncommercial
The hanger consists of two printed parts, one for the right and one for the left.
They must be connected by an 11mm diameter rod to function as shown. You can vary the length to your liking. The holes for the Rod are sized exactly 11mm. Consider this when choosing your rod, or tweak the provided step models to fit yours. The rod used in the pictures is aluminium.
There is a second picture with the main dimensions (based on the right hanger).
I just provided the GCode for the parts i printed in ASA on my Prusa MK3S+, using a 0.6mm nozzle. Please use the 3mf file to tweak the GCode for your Setup.