1 / 2
Original Alcohol | Can | Penny Stove Jig — image 1
1 / 2

Original Alcohol | Can | Penny Stove Jig

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Jig for cutting and hole-making of drink cans for "Penny Stoves". Includes an ultralight vase mode case for stoves.

Rating
4 / 5
Likes
6
Downloads
34
Makes
1
Views
267
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial

 

Introduction:

This precision jig is designed to simplify and standardize the fabrication of Penny Stoves from aluminum drink cans. The jig securely holds cans in position, allowing for consistent, clean cuts and accurately placed burner holes every time.

Upper Rim: Safely guides a utility blade or hobby knife for smooth, even cuts without deforming the thin can walls.

Hole-Making Template: Includes pre-spaced guide holes for drilling or punching uniform burner jets, ensuring consistent flame performance.

Inner Facets: Stabilizes the can to prevent movement during cutting and hole-making.

Durable Construction: Print using PETG for repeatable use in workshop or field settings. PLA is acceptable.

Applications:
Ideal for hobbyists, backpackers, educators, and DIY enthusiasts interested in building alcohol-fueled “Penny Stoves” from recycled cans with professional-quality results. 

I have included sizes for 12oz cans, 22oz Arizona cans, and 8.4oz Redbull cans.

Cases:

                                                              -PRINT CASES IN VASE-MODE-

*CURRENTLY THERE IS ONLY CASEWORK FOR THE 12OZ VARIATION. IF CASES ARE WANTED FOR ALL SIZES, LET ME KNOW AND I'LL BUILD THEM.

  • Print both parts A and B.
  • Place stove into Part A.
  • Cover with Part B.

Friction fit should be sufficient, but feel free to secure with rubber band or similar.

How to make a “Penny Stove”

🔧 Materials Needed

2 empty aluminum cans

Scissors or a utility knife

Push pin or small nail

A penny

Denatured alcohol (fuel)

Tape or sandpaper (optional for smoothing edges)

🪚 Instructions

1. Cut the Cans

Use the appropriate jig to cut the bottom  off each can.

These will become the top and bottom halves of your stove.

Smooth any sharp edges with sandpaper or tape.

2. Make the Burner Holes

Take one can bottom (this will be the top piece).

Use the jig and a push pin to make 21 small holes evenly spaced around the rim.

These are the burner jets where the flame will come out.

In the center, use the jig to make the fill holes.

3. Assemble the Stove

Fit the two can bottoms together — one slides slightly inside the other.

You may need to crimp or trim one edge to make them fit snugly.

The piece with holes goes on top.

4. Add the Fuel

Pour a small amount of denatured alcohol into the center hole (about 1 tablespoon).

Cover the hole with a penny.

5. Prime and Light

Place the stove on a stable, heatproof and fireproof surface.

Pour a few drops of alcohol around the base (to preheat).

Light the alcohol — after 30–60 seconds, the jets should ignite around the rim.

⚠ Safety Tips

Only use outdoors or in a well-ventilated area.

Keep flammables and hands away from the flame.

Wait until the stove is completely cool before refueling or touching.

Never use gasoline or other fuels — only denatured alcohol.

 

 

Tags