Flashlight Battery Saver (FBS) - Light Saber Recharger (LSR)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
18650 battery conversion / modification for 4xAAA to 18650 for LED flashlight.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 7
- Makes
- 0
- Views
- 69
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Public Domain
Reader/Maker/Jedi,
One day I was messing around repairing my X-wing on Dagobah and I dropped a tiny 2x4mm FHCS in the swamp and of course the womp rat was going to eat it. The carpet in Yoda's hut was dark grey and screw was black. I couldn't find it and the 4 AAA batteries in my flashlight were dead.
I look around for the dang batteries in the Junk Drawer and, of course, there's everything BUT batteries in the Junk Drawer.
So, I have these old laptop batteries from the early to mid 2000's that were still sitting around. I tore them apart (carefully) and retrieved the 18650 cells from within. I tested them, most were still good and holding a charge, at least 2V. So I recharged them to 3.7V or a little more.
I tried to use one of the 18650's in the flashlight but it was too loose, didn't fit tight enough and I printed this. MADE ENTIRELY IN PRUSA SLICER. used basic cylinder, and two perpendicular intersecting cylinders as negative spaces stretched in the Z-axis, rotated 90deg. in the Z-axis. Ah, just look at the model in PS!
Fits snug as a bug. Light Saber crystals restored. FBS-LSR.
Note: depending on the flashlight, this will only provide 3.7v (Lithium) instead of 6v (alkaline). Your flashlight/light-saber/laser won't be as (blindingly) bright, but will last longer.
Many cells you recover from an old Laptop battery are REALLY GOOD QUALITY, compared to new cells. LiIon cells can have DOUBLE or TRIPLE (or more) the capacity (runtime) of 4xAAA Alkaline batteries.
Recharge your battery with an advanced smart battery charger (SkyRC, Nitecore, ISDT) to get the best possible performance from your cells. Some models have displays which graph the cells power curve on-screen, or by connecting to a laptop or PC. Ideally, you'll want to charge the cells to near maximum capacity and cut off before the cell is fully “empty”. This extends charge-cycle count exponentially. Or push the charge beyond 3.7V up to 4.2V (Brighter light)
I left it in .3mf format so you could see the individual primitive shapes used to build this directly in the slicer. NO EXTRA SOFTWARE NEEDED.
Yes, you can freely edit these dimensions in PrusaSlicer, AND ADAPT IT TO YOUR NEEDS.
Over all, LEARN HOW TO USE PrusaSlicer BETTER!
Hopefully, your brain is hungry! This is a full meal deal.
And I found that screw! I FOUND that screw!