Proto-Matic Extruder - Ultimaker 2 "resto-mod"
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The extruder for a project I can working on to bring an old ultimaker back to modern 3D printing speeds and standards.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 18
- Makes
- 0
- Views
- 160
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Lets you use a v6 hotend on your ultimaker along with optional LDO orbiter mounting and BL/3D/CRtouch/cartographer mount support.
The model has not actually been tested on an ultimaker yet so I cannot 100% confirm anything yet, however I am waiting for some more parts to come so I do have a model in hand.
Because I need this thing to last literally forever I printed it in Siraya Tech PPA-CF and annealed it for 10hrs at about 100C, but you could easily get away with printing it in ABS, ASA, PC, maybe PETG, or whatever other filaments you want that can handle being close to a hotend. I will be making a full project for this and some of the other things I have in the works are a top lid/enclosure that you can stack other ultimaker 2's on, a bottom tray with support for a raspberry pi, a btt SKR 1.4 and a standard meanwell PSU, along with a door and whatever else I can think to add. If you want to use this for something that goes against the license with the remix rules or whatever then let me know because I am considering redesigning it from scratch since the bowden tube length from the orbiter to the hotend is longer than I would like.