1 / 4
Bathroom Twitter Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
🛠🚻 DIY Motion-Sensor Bathroom Speaker 🐦🎶 Plays soothing bird sounds when you walk in!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 6
- Makes
- 0
- Views
- 84
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
🛠 This DIY motion-activated speaker box brings a touch of nature to your bathroom. When you walk in, it plays gentle bird sounds 🐦 for a calm, relaxing vibe 🌿. You can add your own sounds 🎵 via an SD card, switch between summer ☀ and winter ❄ themes, and easily recharge the box with a USB cable 🔌.
Model introduction: video
Print recommendation:
- 2 Perimeters
- .3 layer height
- 10 - 15% infill
- Supports for the lid
- .4 mm nozzle
- PLA works great for a snug fit
Parts to build the box:
- 1x 18650 Battery
- 1x USB-C charging board
- 1x External USB-C port
- 1x Two way switch
- 1x 2N2222 transistor
- 1x 1.5 inc speaker
- 1x Non-momentary button
- 1x Sound board
- 1x Motion sensor
- 2x M3 heated inserts
- 2x M3 bolts
- couple wires / heat shrinks / isolating tape
Happy printing 😊