1:10 Usopp from One Piece pre timescip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
1:10 Usopp from One Peace pre timescip hueforge
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 4
- Makes
- 0
- Views
- 83
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 97.97x174mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.24mm and the Actual Thickness is 1.92mm
#080a0d PLA PolyLite Black Transmission Distance: 0.3
#303337 PLA Panchroma Ash Gray Mate Transmission Distance: 0.1
#636964 PLA Anycubic Gray Transmission Distance: 1.2
#e2dedb PLA PolyLite White Transmission Distance: 5
This print uses 4 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Ash Gray Mate
At layer #11 (0.96mm) swap to Gray
At layer #16 (1.36mm) swap to White for the rest.