CCH Saal3 Hall3 Wall Mount Wand Befestigung - Overkill Edition
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
a wall plug to mount stuff in some of Hamburg's Congress Center's holed wall, like the one in Hall 3.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 4
- Makes
- 0
- Views
- 97
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Share Alike
Had this idea about a part that would grip into multiple wall-holes and allow heavier loads to be fixed to the wall in my head ever since 38C3. It was tested successfully at 39C3 by mounting a heavy silicon LED string to the wall :-)
Disclamer
This is for securing light loads of single digit kilos
It is NOT for securing people :-D
Usage
Thread a zip-tie through the center-hole
Stick the whole thing into four wall-holes
Use up to four 3mm screws to clamp the assembly in place
Printing
print laying down, sticks up
works with 0.8mm nozzle and 2 perimeters
any infill works. even 0.
Use more perimeters (wall strength) if printing with smaller nozzles (0.4mm or 0.6mm)
PLA works
Parametric
open FreeCAD File
open Spreadsheet inside File
arrange windows inside FreeCAD as “split”
change parameters in Spreadsheet
watch the part change
Variants
v1: designed at home, succesfully tested at venue
v2: not tested, slightly thicker and longer, expected to work even better
History
2025-10-30: release v1 - untested for lack of CCH wall - Feedback welcome
2025-12-26: tested successfully - works very well
License
Creative Commons - Attribution - ShareAlike