1 / 4
R248 Curve L-Gauge Train Track - Compatible with LEGO Track — image 1
1 / 4

R248 Curve L-Gauge Train Track - Compatible with LEGO Track

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This piece of track has a center line radius of 248 studs and an arc of 5.625°.

Rating
0 / 5
Likes
23
Downloads
156
Makes
0
Views
905
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This piece of track has a center line radius of 248 studs and an arc of 5.625°.  A radius of 248 studs was chosen because it is close to the radius of the “Long Smooth Curves” technique created by Holger Matthes (https://www.holgermatthes.de/bricks/en/smooth-curves.php) that uses straight track but aligns to the 16 stud spacing of curve center lines that has become the standard practice.

Each track piece is curved 5.625 degrees so a quarter circle requires 16 pieces.

Print Settings

  • Three perimeters are recommended for printing so that the rail surface is smooth.
  • Supports are needed for the tabs at the end of the rails and I recommend paint on supports.
  • Each printed piece requires about 30 grams of filament.

BlueBrick Parts

BlueBrick (https://bluebrick.lswproject.com/) files are available download for this track piece and are in the file R248BlueBrick.zip.  Unzip and place the files in the BlueBrick\parts\Custom\ folder.  Next, select File –> Reload Part Library in the BlueBrick menu.  The piece should appear under the Custom tab.

 

Update 11/3/25:

Updated the model/.stl file to add small fillets to the connecting tabs.  Old model works, but the new one connects to other track easier.