Valerion projector fan mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Valerion projector fan mount for better cooling and noise levels
- Rating
- 4 / 5
- Likes
- 6
- Downloads
- 187
- Makes
- 0
- Views
- 716
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
Simple friction/push fit mount for fan. "No-airguide" version is default version (pulling hot air from projector). Mount it on side closer to lens. Use USB fan on low speed or you can use USB/PWM Governor (from Aliexpress).
Versions:
120mm (airguide, no airguide)
140mm (airguide, no airguide)
80mm (airguide, no airguide) [ideal for original gimbal stand]
140mm extended mount - optional design
Use the air-guide version if you are pushing air into the projector. Use the no airguide version for pulling air from the projector. From my testing, the air-guide version creates noise if the fan is too close to the air-guide fins. This is much more noticeable at higher RPMs.
For mount you can use self tapping screws that comes with fan.