Huawei H153-381 CPE 5S Wall Mount
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.93 – €8.47 net (excluding VAT)
For file: Huawei-H153-381-Mount_D0.3mm_SunluPLA_MK3S_5h57m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.70 excluding VAT (range midpoint).
- Weight reported by the author
- 133 g
- Print time reported by the author
- 5.95 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A wall mount for a Huawei H153-381 CPE 5S Router
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 122
- Makes
- 2
- Views
- 384
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The space at the back between the wall and the router is set to 20mm. This should be enough space for the cables. If you need more space you can adjust the distance via the variable “Mount: Distance” variable in the FreeCAD project file.
The fit of the router inside the mount is tight, but not too tight. It's 0.1mm on each side/wall. You can adjust the space via the “Mount: Space” variable in the FreeCAD project file.
The wall thickness of the mount is set to 2.0mm and can be adjusted via the “Mount: Thick” variable in the FreeCAD project file.
The hole for the screw is set to 4.7mm in diameter and the counterbore is set to 9.0mm in diameter. Both can be adjusted in the FreeCAD project file with “Mount: Screwhole” and “Mount: Counterbore”. It's made for 4.0 pan head screws with a loose fit.
I've printed this wall mount with Sunlu PLA+ with 0.3mm draft presets and paint-on supports for the pocket in the bottom back.