FlightScope MEVO Setup Spool
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple spool to store an 8' setup cord.
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 32
- Makes
- 0
- Views
- 133
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
As a new FlightScope MEVO Gen2 owner I wanted to speed up my setup. This is a simple reel to store an 8’ long nylon cord used to quickly measure the exact required 8’ distance from the MEVO Gen2 to the tee. I keep a couple of tees with the reel in the factory case.
The stranded cord is ~1mm in diameter so the slots in the reel are .8mm. Some heat shrink tubing lends a finishing touch. PLA+ works well, no need for supports. Print with the cord slots pointing upward.
The level in the 2nd picture can be found as FlightScope MEVO Gen2 Level. Both pieces fit in the factory case if you don’t take the charger to the driving range.
A STEP file is included in case you want to make some changes.