Omer logo lightbox
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wanted some wall decoration and this logo is perfectly suited for it ( Good Belgian beer :) ) (Do we have bad beer?)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 25
- Makes
- 1
- Views
- 87
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Standard Digital File License
Can be mounted against the wall by 2 screws, or just placed on a shelf.
Cable hole invisible should you not decide to put LED's in it.
connectors and shields have 0.08mm of play for a snug fit (0.04mm contour) so should fit for most printers.
Printed letters in PLA, shields in PETG
Will install following LED strip in it:
https://www.amazon.nl/-/en/dp/B09XX4H23J?psc=1&smid=AKB08M8VPXVIU&ref_=chk_typ_imgToDp
Smallest parts in the shield are 7.4mm, this one is 5mm, in the shield you could put them on the backside, at the bigger letters on the side, have to check when they arrive and i start working on it :)
Letters are about 18cm high and total length is approximately 70cm