Starkvind wallmount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wallmount for Ikea Starkvind Aircleaner with quick access by taking it off the wall without tools.
- Rating
- 4 / 5
- Likes
- 8
- Downloads
- 22
- Makes
- 0
- Views
- 189
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
I printet the arms and the connector in abs, but petg should work also.
The Wallmount itself is printet in petg.
IMPORTEND:
Make the Walls of the arms at least 1,5mm thick, perimeters as well as bottom and top. Infill doesn't have to be more than 20%.
I also used 1.6mm perimeters for the wallmount to give the screws something to get a hold on ;-).
Everything was printet without support with the biggest surface on the bed. (everything like shown in the picture)
The arms are connected with superglue as well as the wallmount. In principle you don't need the backplate. I made it so the wall doesn't get scratched taking starkvind off and on the wall.
I'm still looking for the right color, if you have something apropriet, please let me know.
Hope you enjoy the model.