Stealthburner Eddy Adjustable Side mount (works with UHF hotend)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adjustable mount for BTT Eddy, works well even with UHF hotends. If mounting with the case, mount at ~1.75 mm height.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 86
- Makes
- 0
- Views
- 400
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Public Domain
Mount the Btt Eddy on the inside, see the picture for reference.
Adjustable - works event for UHF mounts!
The thickness of the case is around 1.2mm, and the best results are when it's mounted at 2.95mm.
If mounting with the case, try mounting at a height of 1.75mm.
The installation takes around 15mm on x and 5mm on y.
Approx offsets for Eddy:
x_offset: -47mm
y_offset: -7mm
If you're facing accuracy issues, the firmware supplied by BTT is not great.
I highly recommend using Eddy-ng for firmware: https://github.com/vvuk/eddy-ng