Nightmare - MGM Print-Ready Mini

Nightmare | Print-Ready Miniature by Mike Gyver Minis! ⚔🎲

An infernal steed from the darkest planes, the nightmare is a hellish warhorse whose very form is wreathed in otherworldly flames that burn with no heat and cast no light. Its eyes smolder with a sinister intelligence, and its hooves strike the ground with the force of a baleful omen.

Part of my project is building great quality, print-ready D&D (and other TTRPG) miniatures, perfect for your campaigns! 🐉

⭐ Why Mike Gyver Minis? ⭐

• 🎨 Designed for Printability: Sculpted and optimized for successful prints on common 3D printers.
• 🔬 Rigorously Tested: Printed successfully multiple times on Bambu Lab X1C/P2S & Creality K2 Plus (see photos for real print results!).

⚙ Ready-to-Print Files (Multi-Slicer Support!):Includes tuned.3mf project file!

• 1. For Bambu Studio / OrcaSlicer / PrusaSlicer (..._FDMConfig.3mf)
• 3mf file has my tested FDM support settings configured! Also includes an unsupported .stl.

⚠ Assembly Required ⚠

• Prints in 2 parts for best quality & easier printing. 💪
• Assemble using Super Glue Apply sparingly!
• **Pro-Tip:** Fill minor seams with putty (**Green Stuff/Milliput**) before priming for a perfect finish. ✨ (See assembly guide if provided).
   

 💖 A FREE Preview of What's Coming Soon! 💖

This model is a preview of the new Print-Ready standard for Mike Gyver Minis, complete with my tested .3mf file! I'm currently working hard behind the scenes to launch my full, organized Patreon Library (with hundreds of models & 1-on-1 support) in a month or so. 

Stay tuned! For now, please enjoy this free model! Don't worry my models will always be FREE.

 Explore More Free Models & Follow Me: https://linktr.ee/mikegyverminis 🔗

Spend less time troubleshooting, more time playing! 🎉

🛠 Print Settings & Advice 🛠

• Printer Used for Testing: Bambu Lab X1C / P1S / K2 Plus (CoreXY)
  • *Note: Tested extensively on these machines. Results may vary based on your printer type, calibration, and filament.
• Supports: Yes - Use Included .3mf File (Recommended!)
• Layer Height: 0.08mm
• Infill: 10-15% Gyroid
• Filament: PLA / PLA+ (Tested with Bambu PLA Basic Blue Grey and Elegoo PLA Space Grey)

🔥 Important Printing Advice:

1. Prep Matters! 🔑:** A Calibrated printer, Clean build plate (🧼 soap & water!),and Dry filament (💧➡🔥) are essential for success!
2. Support Removal: 

•  **COOL DOWN COMPLETELY** first! 🥶
• Use tweezers/cutters ✂ carefully, starting at the base/brim. Pull supports *down & away*.
• Be extra gentle on thin parts like Hooves and Mane. 👀 Slow is smooth! Minor cleanup (light sanding) where supports touch the model is normal. 
  
  Assembly (If Applicable): Assemble [Number] parts with Super Glue. Optional: fill seams with putty (Green Stuff/Milliput) before priming. 💪

⚙ .3mf File Info:

Includes model pre-oriented with tested FDM support settings for most modern slicers like Bambu Studio/OrcaSlicer/Prusaslicer