1 / 2
BTT BigTreeTech angle extrusion mount for pi tft 70 touch screen and Raspberry Pi
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is made for mounting the pi tft70 touch screen on the front-top of my corexy voron printer.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 99
- Makes
- 0
- Views
- 2,450
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Prints as-is without much difficulty, virtually any printer should be able to handle the overhangs etc. Some bridging required.
Should be printed in PET or ABS for strength, ideally, but for short term use PLA will work.
Includes a cutout for a 4040 fan to blow air across the back of the screen and the RPi board.
See the following for the specs on this device: