Ikea 10 Liters 2 Spool Filament Dry Box
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is an Ikea 10 liters 2 spool filament dry box.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 21
- Makes
- 0
- Views
- 304
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is an IKEA 10-liter dual-spool filament dry box. It can hold two filament spools along with desiccant packs and a hygrometer. The filament can be fed directly from the box to your 3D printer.
You will need some glue, four PC4-M10 pneumatic connectors, eight 608ZZ bearings, some PTFE tube, and two 8 mm (5/16 in) rods, each 160 mm long.
The model is relatively large, and individual components are provided in case your printer cannot accommodate the full assembly in a single print. If printed in separate parts, you will need glue to assemble them.
I place a desiccant container in the center of each spool. I use the 50 mm version of these containers, which can be found here: https://www.printables.com/model/65922-silica-gel-spool-container
The hygrometer I use can be found here: https://www.aliexpress.com/item/1005008841100994.html
Support material is not required except for the rollers. An infill of 20% is
recommended.
This object's main web page is: https://www.ctheroux.com/ikea-10-liters-2-spool-filament-dry-box/.
This object was designed using Solid Edge Community Edition.
You can request the source files on the page listed above.