QuestLove Pocket Kit Kick Drum Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Raise a the 16-inch kick drum about 1.25 inches
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 0
- Views
- 85
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Public Domain
The Questlove Pocket kit comes with a 16-inch kick drum. The beater needs to be adjusted very short and still hits way off center. This raises the drum to about the maximum height that the spurs allow while still being stable, about 1.25-inches. It's still not quite as high as I'd like to get a good beater length and hit just off center, but it's an improvement.
The kick pedal clamps to this, and this clamps to the rim of the drum. I'm using 5mm socket heads and nuts, but it should also allow you to use 7/32" tension rods and standard nuts too so it can be managed with a drum key. I haven't tried this yet.
I printed the base and clamp in PETG-CF and the pads in 95A TPU. I probably should have made the pads thicker and they're a pain to slot in, but it seems to be working for now anyway.
