Sovol SV04 mount for Creality Sprite Extruder without breakout board
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Sovol SV04 Mount for Creality Sprite Extruders (Standard and Pro) — for those who don’t want to use the breakout board
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Sovol SV04 Mount for Creality Sprite Extruders (Standard and Pro) — for those who don’t want to use (or dont have) the breakout board (like me). Printed in ASA.
The original extruder on my SV04 broke, and since replacement parts are no longer available, I decided to replace both stock extruders with Creality Sprite units, which are widely available (and much lighter!!). I installed the Sprite Pro on the left extruder and the standard Sprite on the right.
Among all the available mounts I found, Othmane’s design seemed the best option (https://www.thingiverse.com/thing:6244682). However, since I didn’t plan to use the breakout board for the installation, the original design left a large gap between the extruder and the mount. So, I remixed the model to remove that gap and allow for a solid installation without the breakout board.
I used heat-shrink self-solder tubes for all the wiring. I simply cut the wires, removed the original extruder, and connected the new ones. I had to remove all the connectors from the Creality extruder cables. In addition to the screws, I also applied hot glue between the back of the extruders and the mount to improve stability. The final installation turned out very sturdy.
Print Settings
Printed in ASA with 4 walls; Resolution 0.20 mm; 70% infill; Need some supports.