Sony Sports Walkman : Cassette Player
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€12.93 – €15.80 net (excluding VAT)
For file: sonywalkmansport_0.4n_0.15mm_PLA_COREONE_14h1m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €14.37 excluding VAT (range midpoint).
- Weight reported by the author
- 187 g
- Print time reported by the author
- 14.02 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Sony Sports Walkman : Cassette Player
- Rating
- 0 / 5
- Likes
- 30
- Downloads
- 81
- Makes
- 0
- Views
- 464
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Cosplay & Costumes in general
- License
- Creative Commons — Attribution — Noncommercial
Sony Sports Walkman : Cassette Player
2 hinges. 3 walkman parts
!!! Will probably need to trim down edges of hinges on lid or back. Needed to do some offsets post production and forgot to recalibrate the hinges… bit of sanding should knock them down fine.
As is → designed as a prop. But I actually started this with some adafruit / raspberry pi projects in mind. Hollow it out. It would Also make a killer secret stash box or the ilk.