1 / 5
SELF INKING STAMP (TRODAT 4912 - 47 x 18 mm) — image 1
1 / 5

SELF INKING STAMP (TRODAT 4912 - 47 x 18 mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I updated the 3D model for a simpler and better object and i describe my experience about create stamp face

Rating
0 / 5
Likes
7
Downloads
70
Makes
0
Views
394
Reviews
0

Updated at source:

Model information

Category
Office
License
Creative Commons — Attribution — Noncommercial — Share Alike

NECESSARY NOT PRINTED PARTS:

1 - TRODAT 4912 ink cartridge: https://www.amazon.it/Trodat-Sign-Diffusion-Cuscinetti-autoinchiostranti/dp/B0022QWZM6/ref=sr_1_7?crid=VJ8759F3OOJ1&dib=eyJ2IjoiMSJ9.GrSfEeIpw0P_3tLaLtQrdF2o_9mInJQmByIsTDLwkk_CNmGzfemWQqgIdyZDCeZ5M4jnDoI_7AILQ4rzkI8qZ_Nx_rBRW5298C20oRpt0uXkJKYpJqLdoGDbYBxk-xpIcB8B9hEohicanQxE2FsU9PyB5gntp9ebXiKWH9u6wxPLzM969R0sSWHMQCz7ZdgZOM_EL7JS8K65TavBE6KH94zYcmpWbFC17f3V-UINqDUnnSxq9890bXewh8UC8WYpJL62mJucge1xn-ohmIqMWFtEDz7fmI3bz4U53qvoczs.P7dnxEl1pVoboSaqYeihTgj2WmUNjuzU8ViHTQowUQs&dib_tag=se&keywords=trodat+4912&qid=1762095858&sprefix=trodat+%2Caps%2C98&sr=8-7

2 - SPRING OD 15mm Lenght 30mm: https://www.amazon.it/QUARKZMAN-Compressione-Estensione-Inossidabile-Riparazioni/dp/B0DCZK8LYM/ref=sr_1_9?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=1ZVPJWRVXIV7Y&dib=eyJ2IjoiMSJ9.fbE6G5Kq4q4FsBKNkNrB8CaMoMClJu04GhdzQ1gHUfqtikPuG9gVB9T9LgTHjUKb4chTkrkZU0vM7iFcLk44hnBB1Zb_j3AJxxeu9HozxZaY3YbVZUQZB48YW_M_rJTRqnm49lrzz_lqHfphuoAv1Jj1jCvWnZcYHsFaJwbIaHQjGemijju3T6z9fCEbCcayM3AjJI5ETci6UuR6n4Of3K5aXw7Cxix_-RCyfvlPGBFfv2Y7-lr83xNbXlVSOVcfQcvGLJL-MEtj23r6tPH_m6zFwcnSBoFCbT_PFY-NW3E.bZj5w0GPy-WCL9qi8708A6ANWBxKneS5AbfKiCQm1XE&dib_tag=se&keywords=molla%2Bod15%2Bl30&qid=1762096174&sprefix=molla%2Bod15%2Bl30%2Caps%2C72&sr=8-9&th=1

 

PRINTED PARTS:

SHELL: I have printed it with PLA without supports

BODY: i have printed it with PLA with supports. See 3MF file to watch them.

PAD SUPPORT: I have printed it with PLA, without supports.

STAMP FACE:  Write words in bold uppercase text. Baseplate must be 3mm high and letters must be 3mm high too. The template must have a frame for support the print and that you'll need to cut out after printing. I have printed it with two materials:

- TPU 95A, for printing few big letters (see ABCDEF exemple). 

- TPU 85A, for a lot of small letters (see GIORGIO AGOSTONI STAMPATORE exemple). https://www.amazon.it/Siraya-Tech-Flessibilit%C3%A0-Resistenza-Resistente/dp/B0CP1YS9N6/ref=sr_1_1_sspa?__mk_it_IT=%C3%85M%C3%85%C5%BD%C3%95%C3%91&crid=2RTO2EPR0XK8S&dib=eyJ2IjoiMSJ9.F_z5TLJCK-S5T6f0MnLj8z-KSml1f_JcUcn8kaIv2QoxqbzH5T1joRPW99qlfD_wIRW2Xo0OY1cNHivIMohP2O11BNBliSfXLV_T7Pur4L_55mDRbPUaR36u-LKln8AE4O2nHUXq4QSEQSbNSuTdngKcit8jBdcS4ZLZrUW-X0ZB0y8eeI5GcamlNJC_HueSrhOOeQglHGLOql7GU5Curi-JzA66rhkErHt9kycuQoR8jXsAaQsgPdDPBMtuPE5MNmYwjSRgHY66hWDlhOkm0uWGRfDGpzTKbAGIj-4aDLk.JGpPcFQ6HpYirKhwpScnCfHVTUfV6uNhEFpEK_b2Z7o&dib_tag=se&keywords=filamento%2B85a%2Bsi&qid=1763825750&sprefix=filamento%2B85a%2Bsi%2Caps%2C82&sr=8-1-spons&aref=5AuLV8vJI1&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&th=1

BEST PRINTING METHOD OF STAMP FACE: For better result you must print the ink face on the printer plate (plate must be smooth, like glass or PEI). I have used PEI plate with kapton tape.  You have to be very careful when you detach the pad from the plate (if you want you can refresh the plate before). After printing, I recommend torching the letters a little (very lightly) to burn off any remaining thread. I used a cake torch. In my experience the best printer values are: diameter 0.4 mm nozzle - Bed temperature 30°C for all layers - Nozzle temperature 210°C for all layers

 

ASSEMBLY:

Drop the spring at the body e mount it into the shell, insert the cartridge into the the body (wings of cartdrige will broke).

Glue some double-face tape on the swab holder and then glue the stamp face on it.

Insert the pad support into the body with the stamp face facing the cartridge and insert pad support's stubs in the shell sockets.

Enjoy.

 

 

Tags