Senyera (Catalan flag) fabric
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of a remix, Flipped 3D Printed Fabric, by codfish06. No MMU is required.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 17
- Makes
- 0
- Views
- 88
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution
The fabric prints face down with separate square tiles as pixels. The pixel image is printed as a single first layer so the filament changes can be done manually. I have printed my examples in PLA in a Flashforge Adventurer 5M Pro.
The pixels in the STL files are 0.3 mm high but can be scaled as required.
If the fabric is printed in dark filament the pixel colours may turn up dull. More layers per pixel would suit an MMU but for manual changes I included an STL of interface tiles (also 0.3mm). The examples below show the effect of adding a white interface between the colours and the fabric links.
Of course it is simpler to just print in red and yellow but I happened not to have enough yellow filament that day.