Replacement Left Hinge Part for Bemis Toliet Seat
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Modeled and printed replacement part for a broken hinge on Bemis toilet seat. No support print.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 37
- Makes
- 0
- Views
- 212
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution
Hinge for my Bemis toilet seat broke. Tried to epoxy it back together. Didn't work so modeled a replacement part. If this is a design flaw and you happen to have the same toilet seat hope this saves you some time.
Printed on a Creality Ender 3 Neo. Went pretty over kill on the sturdiness of the part. I went with 6 outlines and 50% infill which was likely too much but didn't really want to need to reprint if it ended up breaking. Used Polyterra PLA in white (found that best print temp is 190). .16 layer height. No support required if you orient part correctly.
I don't think this will work for the right side it is different. It's a soft close Bemis model don't remember which one but not sure if it'll work on yours.
Went for printing with no supports over matching the original. Here's a link to the onshape model if you want to reference or make modification. My cad skills are I know just enough to know I'm not doing it right so no need to tell me I should be using constraints and stuff.
https://cad.onshape.com/documents/e1f874d24bf452e1c1cb8758/w/d5040721e17ac241697dbae9/e/5725efad66a1b36d5b482c33https://cad.onshape.com/documents/e1f874d24bf452e1c1cb8758/w/d5040721e17ac241697dbae9/e/5725efad66a1b36d5b482c33