Cute Squirtle 200x200 mm poster
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€6.84 – €8.36 net (excluding VAT)
For file: SquirtleHF_0.4n_0.08mm_PLA,PLA,PLA,PLA,PLA,PLA_COREONE_6h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €7.60 excluding VAT (range midpoint).
- Weight reported by the author
- 109 g
- Print time reported by the author
- 6.94 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
HF poster of squirtle
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 7
- Makes
- 0
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- 2D Plates & Logos
- License
- Creative Commons — Attribution — Noncommercial
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
The Model is 200x200mm in size
You may print at higher layer heights below the Base Thickness of 0.48mm
The Max allowed Thickness is 2.64mm and the Actual Thickness is 2.56mm
#020606 PLA Elegoo Black Transmission Distance: 0.3
#303337 PLA Panchroma Ash Gray Mate Transmission Distance: 0.1
#296218 PLA Anycubic Green Transmission Distance: 2.2
#562309 PLA Elegoo Brown Transmission Distance: 1.7
#dedede PLA Elegoo White Transmission Distance: 4.2
#07125d PLA Anycubic Blue Transmission Distance: 2.7
This print uses 6 unique filaments
Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Ash Gray Mate
At layer #12 (1.04mm) swap to Green
At layer #17 (1.44mm) swap to Brown
At layer #19 (1.6mm) swap to White
At layer #22 (1.84mm) swap to Blue
At layer #26 (2.16mm) swap to White for the rest.