Led strip holder for Voron V2.4 350 (LDO kit)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A single piece led strip holder for the Voron V2.4 350 to be mounted on the frame with 2 M3 t-nuts and 2 M3x8 screws.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 18
- Makes
- 0
- Views
- 99
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
The suggested led strip holders did not fitted very well in the extrusions so I designed my own. Instead of individual sections, this one is a single piece that gets mounted to the extrusion with 2 M3 t-nuts and 2 M3x8 screws. It is easier to slide in the led strip if you don't remove the adhesive cover (or tape it over again) the design holds the ledstrip without the adhesive. The spacing and length is based on the led strips that were included with the LDO kit. You will need one per led strip and I printed them in ABS. The suggested led strip holders did not fitted very well in the extrusions so I designed my own. Instead of individual sections, this one is a single piece that gets mounted to the extrusion with 2 M3 t-nuts and 2 M3x8 screws. It is easier to slide in the led strip if you don't remove the adhesive cover (or tape it over again) the design holds the ledstrip without the adhesive. The spacing and length is based on the led strips that were included with the LDO kit. You will need one per led strip and I printed them in ABS.
