Nozzle Cleaner - Voron Trident
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.06 – €4.96 net (excluding VAT)
For file: Nozzle_Wiper_Mount_VT_0.2mm_ABS_MK3S_4h15m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.51 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 4.25 hr
- Source material
- ABS
- Estimate material
- ABS
- Estimate printer
- Bambu Lab X1 Carbon - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Designed this Nozzle Cleaner Mount for my Voron Trident
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 88
- Makes
- 0
- Views
- 680
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Been searching for a nozzle wiper mount to add to my Voron Trident. It seems there are my models for the Voron 2.4 but only limited options for the Trident. so I came up with this.
It is mountable on the bed extrusion using 3 M5x12 from below the heat bed (M5 sliding T-Nut used). Additionally 2 socket head M5x12 are used as a separation so it does not stick to the heat bed.
I have used 2 x Silicon Nozzle brushes (from Amazon) and added custom macros to the PRINT_START and PRINT_END so that the nozzle is wiped at the start using one brush and wiped again after the print using the second. Adding second brush on the opposite side also makes it easier to align the build plate as the socket head screws stop the plate from sliding beyond the heat bed.
items required for this model:
- 3 X M5x12 round head machine screws
- 3 X M5 Sliding T-Nuts
- 2 X M5x12 Socket head machine screws
- 2 X Silicon Brush
link to the silicon wiper Brush:
https://www.amazon.com/dp/B0DRBZK7RZ?ref=ppx_yo2ov_dt_b_fed_asin_title
I have printed the model with ABS using the same recommended settings for all Voron parts