8mm Rex FTC Vectored Intake Wheels
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An adapted version of the vectored intake wheels to fit an 8mm hex shaft (rex). Uses M4 screws and nylon nuts.
- Rating
- 0 / 5
- Likes
- 13
- Downloads
- 839
- Makes
- 0
- Views
- 2,072
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
These mecanum wheels are an adapted version of the vectored intake wheels which can fit an 8mm hex shaft (rex) from gobilda.
You can use these mecanum wheels to move artifacts, the elements from the FTC Decode season, from the intake across any side of the robot, as demonstrated by the videos from FTC team Lorentz Engineering.
To assemble you can use M4 screws and nylon nuts which can be pressed in the hexagonal slot on the side.
There are already added tolerances but feel free edit them from the step files if needed.
I made the wheels from PETG with 4 perimeters(walls) and 20% gyroid infill.