Nerf/Airsoft Play Knife
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Toy knife designed to either be used in outdoor sports play or for self defense training.
- Rating
- 0 / 5
- Likes
- 11
- Downloads
- 23
- Makes
- 0
- Views
- 153
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Toys
- License
- Creative Commons — Attribution
For assembly, you will need…
- 1x Blade
- 2x Handle
- 3x Pin
To assemble, place all three pins through the blade, then use glue on the flat side of the handles, close the assembly and clamp in place until dry. I used normal white PVA glue, but any glue should work.
If used for play, please print the blade section in TPU or another flexible filament. I wouldn't exceed 15% infill to make sure the knife remained bendable enough to be safe.
If printing for the intention of playing with others, make sure all parties consent to such a toy being used. A TPU ‘knife’ might not be dangerous, but it still can hurt.
I release all my models under Creative Commons Attribution, but if you find my models helpful, feel free to tip me here: https://ko-fi.com/derpynate