1 / 3
5/8" J Channel Jig for 12mm Pixels
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for the 5/8th J channel that I got from Lowes. This is for the 12mm RGB Pixels.…
- Rating
- 5 / 5
- Likes
- 4
- Downloads
- 47
- Makes
- 1
- Views
- 412
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is for the 5/8th J channel that I got from Lowes. This is for the 12mm RGB Pixels.
https://www.lowes.com/pd/Georgia-Pacific-J-channel-White-0-625-in-x-150-in-Vinyl-Siding-Trim/3037104
- Currently, 2" center spacing
- Depending on which hole that you use for the pin, the original version will create options for 2", 4" or 6" spacing.
- The "short" jig saves plastic and printing time but will only do 2" and 4" spacing.
You can use the outer cut to align with your drill bit.
Print vertical, no supports needed. Print at least one pin for alignment. I do check detect bridging parameters in Prusa Slicer.
Category: Other