Ice scraper Sioux H0 Train / Wagon Déglaceur ou brise-glace Sioux HO Train
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.55 – €0.68 net (excluding VAT)
For file: Deglaceur v25_XL_0.25n_0.05mm_PLA,PLA,PLA_XL_53m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.62 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 53.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A very special instrument mounted on a wagon to break up ice in tunnels / Instrument sur wagon pour déglacer les tunnels
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 38
- Makes
- 0
- Views
- 196
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Print using filament or resin.
For FDM, use a 0.25 mm nozzle with a layer height of 0.05 mm.
Then glue the two parts together, followed by the legs.
UPDATE 11/18/2025:
I modified the de-icer legs to simplify gluing. Instead of gluing four legs, there are now only two pairs of legs.
In this update, I added a gcode for a 3-color print with a Prusa XL.
----------------------------------------------------------------------------
À imprimer en filament ou en résine.
En FDM, utiliser une buse 0.25 mm en couche de 0.05 mm.
Coller ensuite les 2 parties puis les pattes.
MISE À JOUR 2025/11/18 :
j'ai modifié les pattes du déglaceur pour simplifier le collage. Au lieu de coller 4 pattes, il n'y a plus que deux paires de pattes.
Dans cette mise à jour, j'ai ajouté un gcode pour une impression 3 couleurs avec une Prusa XL.