1 / 1
ASAP Sr Single Stage Inner Pole Stabilizing Bushing
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is for the ASAP Sr Single Stage structure. This is designed to lightly hammer into the inner pole end. It is used…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 12
- Makes
- 0
- Views
- 136
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial
This is for the ASAP Sr Single Stage structure. This is designed to lightly hammer into the inner pole end. It is used to stabilize the inner 1 1/2" pole against the larger 2" outer pole. A couple dots of epoxy around or JB Weld helps ensure this does not come out but can also be ground off for future needs.
Print Settings
Printer Brand:
Prusa
Printer:
I3 MK3S
Rafts:
No
Supports:
No
Resolution:
.30
Infill:
50%
Filament: Prusament PETG
Category: Other