K&F Concept ball head clamping nut extension
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extension for clamping nut to enable tighter clamping when using heavy equipment.
- Rating
- 5 / 5
- Likes
- 1
- Downloads
- 9
- Makes
- 2
- Views
- 53
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- GNU General Public License v3.0
Purpose
Extension for clamping nut on a K&F Concept ball head to enable tighter clamping when using heavy equipment.
When using the ball head with a Nikon Z7 and 70-200 f/2.8 lens, I was a little concerned about whether the clamp was thight enough. It was, but next time I want to thighten a little bit more,
Sizes
The nut extension was designed for a K&F Concept ballhead BH-28L but it may suit on other sizes of the ballhed too as long as the outsinde diameter of the clamping measures 18 mm.
Please leave a comment if using the model/part for another size of K&F ballheads.
If you need it for another size feel free to modify the provided FreeCAD file, but please publish it too - thanks.
PETG recommended, weight ~ 3,8 grams
Nozzle 0.4 mm, Layer height 0.2 mm (0,3 mm will do it too), 2 Wall lines (at least), 3 top and bottom shell layers, infill 10 % (at least), no brim, no support.
-------------------------------
The only reward for a hobbyist is likes.
Support / Donation for my work