Ender 3 v3 SE nozzle wipe brush
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Update for thicker mounts to bed. Added height for better contact with ceramic nozzle
- Rating
- 1 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 0
- Views
- 586
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
G-Code I use (use at your own risk):
M220 S100 ;Reset Feedrate M221 S100 ;Reset Flowrate M140 S[bed_temperature_initial_layer_single] ;Set final bed temp G28 ;Home G92 E0 ;Reset Extruder G1 Z2.0 F3000 ;Move Z Axis up M104 S[nozzle_temperature_initial_layer] ;Set final nozzle temp G1 X1 Y-18 Z3 F5000.0 ;Line up with brush M190 S[bed_temperature_initial_layer_single] ;Wait for bed temp to stabilize M109 S[nozzle_temperature_initial_layer] ;Wait for nozzle temp to stabilize G1 X87 Y-16 Z.6 F5000.0 ;Wipe 1 G1 X124 Y-16 Z.6 F5000.0 ;Wipe 2 G1 X87 Y-16 Z.6 F5000.0 ;Wipe 3 G1 X124 Y-16 Z.6 F5000.0 ;Wipe 4 G1 X87 Y-14.5 Z.3 F5000.0 ;Wipe 5 G1 X124 Y-14.5 Z.3 F5000.0 ;Wipe 6 G1 X87 Y-13 Z.3 F5000.0 ;Wipe 7 G1 X124 Y-13 Z.3 F5000.0 ;Wipe 8 G1 X40 Y-18 Z15 F5000.0 ;Raise to clear brush G1 X-2.0 Y20 Z0.28 F5000.0 ;Move to start position G1 X-2.0 Y145.0 Z0.28 F1500.0 E15 ;Draw the first line G1 X-1.7 Y145.0 Z0.28 F5000.0 ;Move to side a little G1 X-1.7 Y20 Z0.28 F1500.0 E30 ;Draw the second line G92 E0 ;Reset Extruder G1 E-1.0000 F1800 ;Retract a bit G1 Z2.0 F3000 ;Move Z Axis up G1 E0.0000 F1800