Pioreactor 20ml and 40ml v1.5

# Human-Readable BOM for Pioreactor v1.5.

## Important Scope Note

This is the base Pioreactor v1.5 assembly only.

It does not include a Raspberry Pi or microSD card.

Those are listed separately in related finished items:

## Main Build BOM

### Electronics and Wiring

- 1 x HAT PCB

- 1 x Eye-spy (left) PCB

- 1 x Eye-spy (right) PCB

- 1 x PD / LED cables

- 1 x AMP male connector, 487526-1 for the IR LED assembly

- 1 x AMP male connector, 487526-1 for the stirring motor

- 1 x INL-5AMIR15 IR LED

- 1 x STEMMA QT cable, 100 mm

- 1 x STEMMA QT cable, 50 mm

- 1 x Heater PCB

- 1 x 7-position flex PCB, 3 in

- 1 x Thermal pad for heating PCB

- 1 x Stirring motor, OD4010-12HSS

- 2 x Socket crimp

### Vessel, Seals, and Process-Contact Parts

- 1 x 20 mL clear glass vial, 28 x 56 mm

- 4 x Stainless steel port

- 1 x O-ring, #011, vial plug

- 1 x O-ring, #018, 24-400 vial cap

- 1 x O-ring, #121, bottom-vial-holder, 50A

- 1 x O-ring, #024, X-profile, top-vial-holder

- 1 x PTFE stir bar, 3 x 12 mm

### Fasteners and Mechanical Hardware

- 21 x M2.5 black metal screw, 8 mm

- 4 x M2.5 black nylon hex standoff, female-to-female, 12 mm

- 4 x M2.5 black nylon hex standoff, male-to-female, 12 mm + 5 mm

- 4 x M2.5 black nylon nut

- 2 x M2.5 brass countersunk screw, 4 mm

- 4 x M3 flathead Phillips screw, 30 mm

- 4 x M3 hex nut

- 2 x Stirring magnet, neodymium, 0.250 in x 0.060 in

### Printed or Fabricated Parts

- 1 x Bottom faceplate

- 1 x Bottom-vial-holder

- 1 x Top-vial-holder, 20 mL, v1.5

- 1 x Vial Cap S, without steel tubes

- 4 x LED caps

- 3 x PD covers

- 1 x Fan and top faceplate assembly housing pieces