Delonghi ECP front panel for Gaggimate
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Delonghi ECP front panel for Gaggimate
- Rating
- 5 / 5
- Likes
- 18
- Makes
- 1
- Views
- 1,699
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Standard Digital File License
FDM Printable and SLS optimised versions of the front panel i made for Gaggimate intergration.
The print requires some supports for FDM. Recommended placement and orientation (notice 2 slots with slopes pointing upwards)
Remember to print screen case for your screen too! (Unless its the 2.8" version) :)
Requires 2x M3x12mm screws and possibly some felt, rubber, double sided tape to make wobble free screen clamp (not needed but reccomended)
4x m2x8mm screws for waveshare mount
For the electronics box: 4x M3x6-8mm optional for lid. 2x M3x6-8mm needed for the board. 2x M4x6mm for SSR
Update January 18 - 2026. Added SLS version (thinned down) of the Lilygo screen case
Update February 26 - 2026. Added Electronics case
Update June 23 - 2026. Added Waveshare 2.8" Version of the front. Thank you SteveB48 for helping with testing it
Update June 28 - 2026. Added slottet holes to the Waveshare 2.8". Screen holes seem to be offset from the 3d model provided. Please re-download if you downloaded the file before this date.