Additional Shelf Bracket to fit IKEA Ekby Valter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An additional bracket to fit on the IKEA Ekby Valter shelf brackets to create a double-decker shelf!
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 0
- Views
- 48
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I looked at the space under my Ekby Valter Ikea shelves and thought, “I could fit another shelf under there if I had the right bracket”, so I designed one!
The holes are countersunk for an M4 (No.8) countersunk screw.
The left and right brackets can print without supports; you just need to make sure they are oriented so that the “C” part of the bracket is vertical, with the holes horizontal and the base of the “T” is still on the print bed (as in the last photo).
The rear brackets can be used for left or right, but the “shelf-securing” screw hole is not countersunk.
Happy to receive ideas for improvements, just leave a polite comment and I'll consider them.
Designed using Siemens NX.
Printer: Prusa Mini+
Filament: Prusament PLA Galaxy Black
Nozel: 0.4mm
Layer height: 0.2mm
Infill: 15%
Enjoy!