Vespa GTS Number Plate Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Vespa Number Plate Holder – Slim Replacement for GTS & GTV
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 25
- Makes
- 0
- Views
- 142
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
Vespa Number Plate Holder – Slim Replacement for GTS & GTV
Ditch the bulky factory plate holder. This slim, clean number plate holder is a direct replacement for the oversized stock unit on the Vespa GTS and GTV, giving the rear of your scooter a tidier, more streamlined look.
Designed around Australian motorcycle plate dimensions, the model is easy to modify if you need to suit a different plate size or country. Mounting holes are recessed for a neat, finished fit.
Road-proven: printed in Prusament ASA and ridden over 2,000 km without issue.
✅ Features
Slim, low-profile replacement for the large factory GTS/GTV plate holder
Sized for Australian motorcycle plates (easily modified for other regions)
Field-tested over 2,000+ km
Original design
🖨 Recommended Print Settings
Setting | Value |
|---|---|
Material | ASA (recommended for UV/weather durability) / PETG |
Layer Height | 0.2 mm |
Perimeters/Walls | 3+ |
Orientation | Print face down |
Supports | Required in the bolt relief holes |
⚠ ASA is strongly recommended — this part lives outdoors in full sun. PLA will sag and deform; ASA (or PETG as a backup) holds up to UV and heat. Print in an enclosure to prevent warping during print.
🔧 Installation
Print face down with supports in the bolt relief holes; remove supports cleanly.
Mount to the scooter using the factory mounting points.
Fit your plate and secure with bolts seated into the recesses.
🛵 Compatibility
Vespa GTS 300 and GTV 300 models
Plate fitment: Australian motorcycle plates (modify dimensions for other regions)
Made one for your Vespa? Post a photo — always great to see them on the road.