1 / 6
AIRSOFT CYMA RPK front sight repair or protection — image 1
1 / 6

AIRSOFT CYMA RPK front sight repair or protection

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

A way to repair or protect your RPK CYMA CM.052 front sight !

Rating
0 / 5
Likes
1
Downloads
10
Makes
0
Views
83
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

On the RPK CYMA CM.052, the top of the front sight is thinner than on other AKs from the brand. This is unrepairable because it is made of an aluminum alloy that is not very strong... and CYMA spare parts are very rare. Super glue works, but the slightest impact during airsoft play breaks the part again. So I created a protective piece that acts as a sight tunnel. It's fairly discreet and doesn't affect the look of the replica. 

My measurements are taken from my RPK replica. This part of the front sight can bend with impact. Depending on your printer settings, you may need to adjust it with sandpaper or scale it up. 

If it's for a repair (and you've lost a small piece of the front sight), you can glue it on. If it's for protection, you can gently push it in; since it fits snugly, it should stay in place on its own. 

It's fairly resistant, but it's not steel!

If you are satisfied and would like to leave me a little extra or buy me a coffee, download the STL files here : AIRSOFT CYMA RPK front-sight réparation/protection

I printed with PETG-CF (carbon fiber) that I had on hand. It gives a nice gunmetal look. You can use PETG, ABS, or ASA. A good PLA should suffice. I printed at 0.16mm, 100% infill, 6 shell layers. No support needed.

Tags