AIRSOFT CYMA RPK bipod repair
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple way to repair your bipod on RPK Cyma CM.052
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 14
- Makes
- 0
- Views
- 104
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
On the RPK CYMA CM.052, the bipod attachment to the barrel broke into several pieces. It is irreparable because it is made of an aluminum alloy that is not very strong... and CYMA spare parts are very rare. So I recreated the part.
My measurements are taken from the RPK replica and are accurate. Depending on your printer settings, you may need to adjust them with sandpaper.
Using a drill and a 3 or 3.5mm drill bit, remove the rivets to detach the legs from the broken part. Be careful with the spring!
Use two M4x18 bolts to reattach the feet to the printed part. I recommend using threadlocker. The bolts are just the right length for 3mm thick nuts. To hide the nuts, I made small covers to print. It's resistant, but it's not steel. So you still need to be careful!
If you are satisfied and would like to leave me a little extra or buy me a coffee, download the STL files here : AIRSOFT CYMA RPK réparation bipied
I printed with a filament that can withstand high stresses, a PETG-CF (carbon fiber) that I had on hand. The advantage is that it remains easy to print. You can use ABS or ASA. I printed at 0.16 mm, 100% infill, 6 shell layers. tree support, only on the bed.