1 / 1
American Lock 1100 Springless Actuator
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a springless actuator for the American Lock 1100 series padlocks.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 12
- Makes
- 0
- Views
- 74
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a springless actuator for the American Lock 1100 series padlocks.
- Unlock the padlock
- Remove the screw under where the shackle locks
- Remove the core
- Close the shackle and push it down a couple of times to make the actuator and ball bearings drop out
- Drop the ball bearings back in
- Press the shackle to the locked position and use a tool to put one ball bearing on each side of the lock leaving the hole for the actuator clear
- Drop the printed springless actuator in making sure it gets seated completely
- Rotate the actuator so that it aligns with the core.
- Drop the core in and reassemble the rest of the lock.
2025-11-14: Improve shackle action when unlocking
2025-11-12: Improve fit