Digital Level Gauge wheel mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Wheel mounted carrier for the DXL360s dual axis level box to suit NISSAN wheels with a 50mm center cap
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 7
- Makes
- 0
- Views
- 35
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution
This model is a multi piece mount designed to hold the DXL360S Dual Axis Level Box and then clip it into the center cap hole on your wheel for taking camber measurements.
It's designed in three parts:
- Main body to hold the Level Box
- Spring retainer to clip inside the wheel
- Retention piece to hold it all together and allow rotation.
The main body is designed to suit the DXL360S Level Box with dimensions 63mm x 66mm x 28mm.
The Spring Retainer is to suit Nissan factory wheels or any wheel with a 50mm center bore.
The retainer uses the spring steel clip from your existing center cap - you can put it back on the cap when you're done using the level box.
I've used M5 machine screws and M5 heat set inserts to hold the assembly together.
My version is printed in PETG for the main body and PCCF for the spring retainer, but any material should be fine.