Tado M28x1.5 radiator thermostat coupling
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Spare part for Tado M28x15 radiator valve to thermostat coupling
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 15
- Makes
- 0
- Views
- 155
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial
Last year, I bought some Tado radiator thermostats to give me better control over my heating in winter. The problem was that when I first installed the M28x1.5 radiator valve coupling, I tightened the screws too much. After about a week, the Tado thermostat fell off the radiator valve. Yes, I broke the part.
Winter is just around the corner, so I decided to print a spare part for it! I tried PLA, but this material cannot withstand the temperature of hot water. This time, I printed with white PETG from Amazon, using a 0.4 mm nozzle and a standard IS profile. To achieve a good print, please use supports on both parts in the following area. In my case, I could remove them without any issues.
