1 / 4
M8 Nut for Comgrow SH02
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lost the nut so I made a replacement.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 28
- Makes
- 0
- Views
- 100
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Public Domain
Lost the nut for the filament feed out of the dryer. I tried other supposed M8 models but none worked. So I made my own. Printed in PETG at 0.1 mm layer height and 100% infill. Included the FreeCAD design file. The important adjustment is for the Hole thread feature - custom clearance. I set it to 0.200 but you might need more depending on the precision of your printer. A clearance of 0.2 worked for PETG on my MK3s but PA (nylon) on my Core One needed 0.4, Alternatively, you could scale X and Y. I might leave Z scaling alone.