1 / 6
Chevrolet Badge Telescopic Fidget
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This creative fidget will help you destress anywhere you go!
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 17
- Makes
- 0
- Views
- 86
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
Problem Statement:
You and a partner have been tasked with choosing and remaking a silhouette within an 18cm x 18cm space. You will have to make a series of offsets to complete the model, make sure to use your partner for feedback and for help.
Design Process:
We started off by importing a reference image to trace within the 18 cm x 18 cm constraint box.
The began the design process by tracing the silhouette.
Then, we made all the offsets, alternating between 0.08 cm and 0.24 cm, until we couldn't go any further.
Following the offsets, we finished the extrude and cut process, starting with the outer edge, extruding one line, then cutting the next, all the way to the middle
After the extruding process, all that was left to do was mirror before exporting.
Design Changes:
After printing the first model, the innermost offset “chunk” was not touching the plate, therefore causing the printer to mess up.Had to remake the inner offsets because the corners were not all in line with eachother
3. The last change we made from the original to the final model was enlarging the outermost layer, to make the overall structure more rigid and less wobbly.
vs.