Phone Kickstand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Phone kickstand that can be stuck to your phone or case by a double sided tape or any adhesive (not recommended).
- Rating
- 1 / 5
- Likes
- 13
- Downloads
- 141
- Makes
- 0
- Views
- 425
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Noncommercial
KICKSTAND!!!
This phone kickstand that can be attached on the phone back or case.
Printed in 2 parts and filament wire used as hinge that can be repaired easily if broken.
3 parts in total, no supports!!!
Assembly
To attach the leg to base of kick stand follow these simple stand:
- Pass filament through the hole arm of the stand and leave some part exposed, 2mm on both sides.
2. Flip the base and pass the arm through the passage and hook the hinge pivot to the holes.
3. Press on the protruding part to make it flush.
4. Press on it hard with something so that it can be press fitted into the hole, you will hear a snap sound when it locks in place.
5. Attach the tape or adhesive of your choice. I only had this overkill!!!
And you are done!!! Enjoy!!!
