tinker's suitcase
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Functional cyberpunk flavored suitcase for huge printers (50X50 cm min.)
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 8
- Makes
- 1
- Views
- 96
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The tinker's suitcase is my first model for large coreXY printers. It is a fully functional suitcase measuring 47 X 30 cm. The material is PET-G. PCT-G, for greater strength ABS, or gluing an aluminum strip to the inside of the case at the handle attachment point. The parts are connected with M5 X16 screws (handle) and M4X20 (clips). The hinge is fitted with a metal or laminate rod with a diameter of 4 millimeters. The top and bottom can be cut from any sheet material with a thickness of 1 mm, and glued (riveted, screwed, sewn) into the prints …. because it is the tinker's case, so you can free your fantasy.
Support is only needed for the overhang on the lid and the handle.