Remembrance Poppy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My take on a reusable remembrance day poppy. Uses 2 12x4mm round magnet. Can be printed without MMU/AMS.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 61
- Makes
- 0
- Views
- 212
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Fashion Accessories
- License
- Creative Commons — Attribution
This is my version of a reusable poppy. I don't like how much waste the disposable kind create so this is one that can be reused and won't fall off as easily. If you are going to use it please also donate to your local veterans service or legion.
I designed it to be press fit and shouldn't need any glue but there is a version that can be glued in place if your tolerances aren't tuned. Use a second magnet inside your cloths to hold the poppy in place. I decided against a printed insert for the second magnet since a 3D print will chafe and I didn't feel it would be necessary.
Instructions:
Print the pedals in red and the center piece in black (0.2mm layer height, 0.4mm nozzle recommended)
Place a 12x4mm round magnet in the center of the pedals
Place the poppy on a flat surface and press the center piece in place. If it is the standard version it should snap in. (There is a second version of the center if your printer isn't tuned.)
Place a second magnet inside your cloths to hold the poppy in place.